Measure OUTSIDE of Flue Tile. Use chart to order proper size. Each size
of CHIM-A-LATOR® has 2.25 inches of adjustment.
Measure Height of Flue Tile Extending Out of Chimney. If this measurement
is less than 1.25 inches, you will need a flue extension.
Estimate Length of Flue. If longer than 30 ft. request longer cable when
ordering a CHIM-A-LATOR®
If chimney has an Offset at Top of Flue. CHIM-A-LATOR® shipped with
7 ft. of cable casing to protect cable at rub points. If offset is higher
than 7 ft. order a longer piece. |