|
Standard, Oversized and Custom Top Sealing
Fireplace Chimney Dampers
The all stainless steel CHIM-A-LATOR ® easily mounts on top of a masonry fireplace
flue and is operated by a convenient, adjustable regulator installed on the side
wall of the fireplace.
It is far more efficient than conventional cast iron
dampers and the ideal replacement for old defective dampers.
Made to fit... 17 common flue sizes,
odd size & oval flues, flush flue applications
and the popular " there is no flue, its just a hole " |
Detailed Pictures |
Proven
for over 30 years to be the most trouble free top sealing damper.
- 100% Stainless Steel
- Satisfaction Guaranteed. If within 30 days, you
are not fully satisfied return the CHIM-A-LATOR® for a full refund.
- Lifetime Warranty, best on the market today.
- Fast Installation Comes fully assembled for fast and easy
"bolt to flue" installation.
- Chimney Fire Tested with little or no damage to unit. Will not fall
and close flue in event of a chimney fire.
- Saves Energy tight seal on top of the chimney, keeps heat in when
fireplace is not in use.
- 17 Standard Sizes
- Six Setting Regulator controls the amount of draft to produce more
heat when burning.
- Prevents Down Draft Smoking caused by wind.
- Keeps Out Animals, birds, insects, bees, rain, leaves, wind and
airplane noise.
Additional Options...
Smaller 5/8"
Spark Arrestor Mesh
Round, Oval,
Square, Rectangular & Custom CHIM-A-LATOR Bases
( also
used for chimneys with no flue and flush flue applications
)
Black Color
Option ( Powder Coat Black over Stainless Steel )
|
8 x 8 Chimalator Delux...
8 x 13 Chimalator Delux...
8 x 20 Chimalator Delux...
10 x 18 Chimalator Delux...
12 x 12 Chimalator Delux...
13 x 13 Chimalator Delux...
12 x 16 Chimalator Delux...
13 x 18 Chimalator Delux...
13 x 21 Chimalator Delux...
16 x 16 Chimalator Delux...
16 x 20 Chimalator Delux...
18 x 18 Chimalator Delux...
18 x 21 Chimalator Delux...
20 x 20 Chimalator Delux...
20 x 24 Chimalator Delux...
24 x 24 Chimalator Delux... |
Call 1-800-685-8263 or e-mail us at
info@volko.com
Custom Combination
Fireplace Cap-Damper Damper Opens 6.5"
Easy " Bolt-On " Flue Installation
Removable Handle ...
Six Setting Regulator is installed within the firebox on either side.
Removable handle extends past the opening to allow damper setting even
during a fire. Control the amount of draft to one of the 6 settings to produce more
heat when burning and remove handle to close a spark screen or glass doors.
|
Detailed Pictures |
Flue Size |
Width |
Length |
|
( From - To ) |
( From - To ) |
8 x 8" |
7 - 9.25 |
7 - 9.25 |
8 x 13" |
7 - 9.25 |
11 - 13.5 |
8 x 18" |
7 - 9.25 |
16 - 18.25 |
8 x 20" |
7 - 9.25 |
18 - 20.25 |
10 x 18" |
8 - 10.25 |
16 - 18.25 |
12 x 12" |
10 - 12.25 |
10 - 12.25 |
13 x 13" |
11 - 13.5 |
11 - 13.5 |
12 x 16" |
10 - 12.25 |
14 - 16.25 |
13 x 18" |
11 - 13.5 |
16 - 18.25 |
13 x 21" |
11 - 13.5 |
19.5 - 22 |
16 x 16" |
14 - 16.25
|
14 - 16.25 |
16 x 20" |
14 - 16.25 |
18 - 20.25 |
18 x 18" |
16 - 18.25 |
16 - 18.25 |
18 x 21" |
16 - 18.25 |
19.5 - 22 |
20 x 20" |
18 - 20.25 |
18 - 20.25 |
20 x 24" |
18 - 20.25 |
22 - 24.25 |
24 x 24" |
22 - 24.25 |
22 - 24.25 |
|
|
CHIM-A-LATOR®
Ordering Instructions
Measure
OUTSIDE of Flue Tile. Use chart on left & visit the installation page to order proper
size.
Each size of CHIM-A-LATOR has 2.25 inches of adjustment.
Measure Height of Flue Tile Extending Out of Chimney.
If this
measurement is less than 1.25 inches, you will need a
flue extension. Estimate Length of Flue..... If longer than 30 ft. order longer cable when
ordering a
CHIM-A-LATOR ®
Designed Not to Fall
Down In the Event
of a Chimney Fire! |
Detailed Pictures |
Note.. if chimney has an Offset at Top of Flue. CHIM-A-LATOR ®
is shipped
with 7 ft. of cable casing to protect cable at rub points. If offset is
higher than 7 ft. order a longer piece.
|
Call 1-800-685-8263 or e-mail us at
volkosupply@yahoo.com
Check out all our top sealing damper options
at
chimneydampersource
Free
Shipping!!
Top Sealing Chimney Dampers
Free Shipping!! |
|
|
|
|
|
|
|
Original |
Lock Top |
Lock Top II |
Damper Cap |
RS Adaptors |
Round Spider |
|